Insulation tape

It uses the same material as hbc rubber and plastic insulation products, and its performance indicators are consistent with the products. To ensure good thermal insulation effect, it is recommended to wrap it multiple times to ensure that the overall thickness is basically consistent with the required material thickness to prevent condensation.

Product Introduction

The thermal insulation tape is made of the same material as the hbc rubber and plastic insulation products, and its performance indicators are consistent with the products. To ensure a good thermal insulation effect, it is recommended to wrap it multiple times to ensure that the overall thickness is basically consistent with the required material thickness to prevent condensation.

Application

Applied to valves, pipe joints or special-shaped parts with complex shapes to prevent system heat/cooling loss, control condensation, and reduce vibration and noise.

Technical Parameters

Performance Project
Technical Parameters
Implementation Standards
Standard Specifications



3mm (thickness) * 5cm (width) * 20m (length); 5mm (thickness) * 5cm (width) * 20m (length); other sizes can be customized according to the situation.
/



Veneer width

1.2 m

/
Water vapor permeability g/(㎡.s.Pa)
≤4.0×10^-9
/
Thickness (micrometer)
/
/
Bulk weight kg/m³
16≤P≤24;24≤P≤32;32≤P≤40;
GB/T 13350
Thermal load shrinkage temperature ℃
≥250;≥250;≥250
GB/T 13350
Thermal conductivity W/(m·k) Average temperature 70℃

≤0.048;≤0.044;≤0.042;

GB/T 13350
Bursting strength N
≥250
/
Tensile breaking strength N/25mm
≥600;≥350;
/
Combustion performance grade

Non-combustible materials

GB 5464
weight

/

/
Combustion performance grade

A-level

GB 8624
Formaldehyde emission mg/L (detection limit 0.30)

Not detected

GB/T 13350

Thermal conductivity W/(m·k) Average temperature 25℃

≤0.041;≤0.038;≤0.036;
GB/T 13350